사 양

• Human Vibration measurements meeting ISO 8041:2005, ISO 2631-1,2&5 (including VDV and MTVV) and ISO 5349
• Six channels for acceleration (IEPE type) and two channels for static force measurements
• Whole-Body measurements:
  • Low-cost seat accelerometer SV 38V
  • Seat accelerometer SV 39A/L
• Hand-Arm measurements:
  • SV 50 triaxial accelerometer with set of adapters
  • SA 55 adapter with triaxial mechanical filter
  • SV 105 integrated triaxial accelerometer, adapterand grip force sensor (under development)
• Time-domain signal recording (meeting ISO 2631-5)
• 1/1 and 1/3 octave real-time analysis
• Advanced data logger including spectral analysis
• Micro SD flash card for mass data storage
• USB 1.1 Client interface
• Integration time programmable up to 24 h
• SvanPC+ software for easy instrument setup and data download
• Easy in use, user friendly interface with colour display
• Pocket size (140 x 83 x 33 millimetres)
• weight only 390 grams including batteries
  
  

  SV 106 - 기술 사양

  V I B R A T I O N  L E V E L  M E T E R / A N A L Y S E R Standards ISO 8041:2005, ISO 2631-1,2&5, ISO 5349 Meter Mode RMS, VDV, MTVV or Max, Peak, Peak-Peak, Vector, A(8), Dose, ELV, EAV Simultaneous measurement in six channels with independent set of filters and detector constants Filters Wd, Wk, Wm, Wb (ISO 2631) and Wh (ISO 5349) and Band Limiting filters RMS & RMQ Detectors Digital true RMS & RMQ detectors with Peak detection, resolution 0.1 dB Time constants from 100 ms to 10 s Data Logger 1   Time-history data including meter mode results and spectra (option) Time Domain Recording1 Simultaneous x, y, z time-domain signal recording, sampling frequency selectable: 375 Hz, 3 kHz or 6 kHz (option) Analyser1 1/1 octave real-time analysis with centre frequencies from 0.5 Hz to 1000 Hz (option) 1/3 octave real-time analysis with centre frequencies from 0.4 Hz to 1250 Hz (option) Accelerometer SV 38V low cost triaxial accelerometer for Whole-Body measurements SV 50 set for Hand–Arm measurement (Dytran accelerometer 3023M2; adapters SA 50, SA 51, SA 52) - SC 118 integrated connector required SV 105 integrated triaxial Hand-Arm adapter with grip force sensor (under development) Measurement Range Transducer dependent: 0.01 ms-2 RMS ÷ 50 ms-2 Peak (with SV 38V and Wd filter) 0.1 ms-2 RMS ÷ 5000 ms-2 Peak (with SV 50 and Wh filter) Frequency Range 0.1 Hz ÷ 2000 Hz BASIC DATA Input 2 x LEMO 5-pin: six channels IEPE type or Direct and two channels for force transducers Dynamic Range 90 dB Force Range 0.2 N ÷ 100 N (dedicated channels for force transducers) Sampling Rate 6 kHz  Memory Internal 16 MB non-volatile memory Micro SD flash card slot (supports 8 GB ÷ 16 GB cards) Interfaces USB 1.1 Client, Extended I/O - AC output (1 V Peak) or Digital Input/Output (Trigger - Pulse) Power supply Four AA batteries (alkaline) operation time > 12 h (6.0 V / 1.6 Ah)2 Four AA rechargeable batteries (not included) operation time > 16 h (4.8 V / 2.6 Ah)2 USB interface 500 mA HUB Environmental Conditions Temperature from -10 oC to 50 oC Humidity up to 90 % RH, non-condensed Dimensions 140 x 83 x 33 mm (without accelerometer) Weight Approx. 390 grams including batteries (without accelerometer) 1function parallel to the meter mode 2with one triaxial accelerometer in meter mode